Use case 04 · Asset Tracking (No GPS)
Find any asset, no trackers required.
Fitting and maintaining GPS trackers on every cart, dolly and piece of equipment is costly and never complete. AeroTwin recognises assets in the cameras' view and places them on the airfield map.
- Coverage
- 360°
- Tracked GSE
- No GPS
- Alerts
- 1 open
What it sees
What AeroTwin picks up
Vision AI on 360° RGB and thermal cameras, mounted on airport vehicles and at fixed positions.
- 01
GSE and vehicles
Tugs, belt loaders, GPUs and other ground equipment, recognised by type.
- 02
Carts and containers
Baggage carts, dollies and ULDs — the assets that never get trackers.
- 03
Last-seen location
Where each asset was last seen, and when.
- 04
Out-of-place assets
Equipment left in a stand, roadway or clearance area.
- 05
Utilisation
How often assets are actually used, and where they sit idle.
- 06
Condition at a glance
Visible damage spotted and routed to maintenance.
How it works
From camera to Aerosimple Asset Management
- See. Fixed and vehicle-mounted cameras observe the apron and service roads.
- Recognise. Vision AI identifies each asset by type, and by its markings where they're visible.
- Locate. The asset is placed on the airfield map, using the camera's position rather than a device on the asset.
- Act. Misplaced or damaged assets raise tasks in Aerosimple.
Why it matters
No hardware on assets
Nothing to install, charge or replace on each piece of equipment.
Less time searching
Crews go straight to the equipment they need.
Right-sized fleets
Utilisation data shows where equipment is short or surplus.
At a glance
The essentials
- Cameras
- 360° RGB + thermal — vehicle-mounted, fixed, or both, planned per airport.
- Feeds into
- Aerosimple Asset Management
- Built for
- Ground operations, fleet managers and ground handlers.
See Asset Tracking (No GPS) on your airport
We'll walk through it using your own airport's layout and show where cameras would add the most.